After a few requests from the Aprillia Forum we have put together this small "kit" as a solution.
It contains the following
- 2 or 3 pin relay depending on stock availability
- Two adaptor harness leads to enable changing of pin layout if required - alternatively the terminals can be popped out of the holder and swapped.
- Diodes x 2
The 3 pin relay will do the job of the two pin version, the 3rd pin is actually for the dash warning light - in this application it will be unused unless you want to run a new wire up to the dash warning light switch. If you do not want to do this extra work use the diodes as per the instructions on the Aprillia forum.
http://www.apriliaforum.com/forums/showthread.php?t=132047