Landrover Defender 90 110 LED indicator flasher relay Land Rover

Works with any mix of LED and normal bulbs. Ideal if you have bought the Britpart or Bearmach LED light set and now found it does not work as they do not sell the relays and did not bother telling you!

This will prevent you having to cut your wiring loom and install load resistors making it plug and play.

This unit is 3 pin, some Land Rovers a 4 pin unit is fitted - all the fourth pin does is illuminate the picture of the caravan on the dash when towing ONLY if you have factory fitted towing electrics. All the lights will work fine including those on a trailer using this unit. If you really want a 4 pin unit then click here 4 pin 12 Volt only Land Rover flasher relay note that on some Land Rovers the trailer light will come on even when not connected when using the four pin relay.

Multivoltage so will work on 12 or 24 volt vehicles

This is the relay supplied as standard within our River Runner replacement lights set used on Land Rover etc

Please check the pin layout of your existing relay as there are different combinations - then check our other relays if this unit is not compatible. This unit will fit the Discovery 300

Pin 49   may also be marked as X, B, + or 15  - normally the postive power supply

Pin 49a may also be marked as L, C or Comm - normally the indicator switch

Pin 31   may also be marked as -, E               - normally the earth/negative