70mm diameter complete LED lamp assembly to replace incandescent
units supplied by L E Perie, Lucas & Wipac used extensively on Land Rover
Series Defender and Puma models and found various other applications such as
Ariel Atom, Caterham, Westfield etc. The fixings locations are identical making
them a direct replacement without the need for cutting drilling or the use of
plinths, the fixings are made from the rear rather than through the lamp greatly
enhancing the strength of the lens and making them extremely theft
resistant.
Designed & Manufactured for Mobile Centre is the
US ensures a high level of
quality and durability for the product, the “black” base is actually die cast
aluminium and the latest surface mount LED technology has been employed in the
construction of the product enabling us to offer a four year warranty on the
product.
Click here to
download a feature published in Land Rover Monthly
Magazine August 2010 covering LED products and the installation of
these units.
The entry level vehicle set contains the following:
-
4 x Indicators (turn signals)
-
2 x Brake & side lights (stop &
tail)
-
2 x Front side lights (front position or park lights) with DRL
(Daytime Running Lights)
-
1 x Reverse light
-
1 x Rear fog light
-
1 x Plug in LED flasher relay (will also work on 12 or 24 volt
systems)
Note -
The lamps are supplied with approx 600mm of colour coded cable with
bare ends, if you want the Land Rover style connectors to plug them straight in
please select that option above in the "wiring harness" box. The front position
light will plug straight in but because of the DRL option you will have a spare
wire for this function which will need a 12 volt supply to work - please contact
us for further information on this and how to connect
it.
Key points:
-
E
approved so are legal certified for use on the road and will pass MOT, SVA,
TUV etc
-
Dual
voltage so will work on 12 or 24 volt systems without
adjustment
-
IP67
rated so can be used for off roading and wading
-
Four
year warranty
-
No
internal reflector to corrode or discolour
-
Die
cast aluminium housing for maximum durability
-
No
external screws to corrode
-
Much
lower power consumption
-
Greater perceived output increasing visibility and
safety
-
Not
manufactured in the Far East
-
Straight replacement without the need of
drilling, cutting or the use of plinths or adaptors.
-
Will fit standard or custom headlight
surrounds such as KBX
-
Fit under standard lamp guards
Daytime Running Lights fitted to a
Defender
Picture
shows set of 8 and is used for illustration purposes only. The kit supplied will
contain a rear fog and reverse.
