Description

Hardwired resistor pack for installation on trailers.

The resistors are pre wired and mounted in a metal enclosure to help dissipate heat, the enclosure should be mounted onto metal using the M5 holes. Try not to mount on the outside of the trailer in direct exposure to the elements - try to use a sheltered location somewhere underneath on the trailer chassis or frame.

An ideal place for connections is close to an existing junction box for access to the electrical connections.

White cable is negative (Ground)

Yellow - Left hand indicator

Green - Right hand indicator

Red - Brake

Grey - Fog

The grey wire could also be connected to both position lights but this would connect the left and right side together which will be an issue if there is a requirement to control these separately such as leaving a vehicle parked with only the right hand side lights on

Dimensions 140mm L x 65mm W x 30mm H