1 Foot Standard Banana jack test lead (10 gauge) with Stackable connector including male and female and female end. Stackable...
£10.80
£9.00 ex. VAT
3 Foot Standard Banana jack test lead (10 gauge) with Stackable connector including male and female and female end. Stackable...
£14.40
£12.00 ex. VAT
3 Foot Standard Banana jack test lead (10 gauge) with Stackable connector including male and female and female end. Stackable...
£14.40
£12.00 ex. VAT
Switch for Power Probe 3 - suitable for later models with user changeable switch * If your Power Probe 3 has a slot either side...
£12.00
£10.00 ex. VAT
Female to Female Standard 4mm banana plug adapter for connecting to 4mm male to male banana jack leads. Female-Female Banana...
£16.80
£14.00 ex. VAT
Male to Male Standard 4mm banana plug adapter for connecting to 4mm female to female banana jack leads. Male-Male Banana...
£16.80
£14.00 ex. VAT
6 Foot Standard Banana jack test lead (10 gauge) with Stackable connector including male and female and female end. Stackable...
£16.80
£14.00 ex. VAT
Flat blade adapter allows connectivity to female blade fuse sockets and flat terminals. As supplied in the Master Technicians kit...
£9.60
£8.00 ex. VAT
Back probe adapter allows connectivity to all electronic terminals on back side of connector without damaging seals. Mini...
£8.40
£7.00 ex. VAT
Insulated Alligator clip with a standard 4mm male banana plug. Connects to Standard test leads with 4mm banana jack. ...
£7.20
£6.00 ex. VAT
Single terminal bulb adapter for connecting to the vehicles circuits through the light bulb sockets. 1156 bayonet type light...
£9.60
£8.00 ex. VAT
Double terminal bulb adapter for connecting to the vehicles circuits through the light bulb socket. Typically used in rear tail...
£19.20
£16.00 ex. VAT
Double terminal "Wedge" bulb adapter for connecting to the vehicles circuits through the light bulb socket. Typically...
£19.20
£16.00 ex. VAT
Chisel Tip is designed for use with the Power Probe Soldering Tools. Nickel plated brass Chisel Tip threaded for secure...
£7.20
£6.00 ex. VAT
Piezo Electronic Igniter for Micro Torch
£9.60
£8.00 ex. VAT
Replacement electronic igniter for PPSK
£7.20
£6.00 ex. VAT
Heat blower attachment designed to work with the Power Probe Micro Torch. Can be used with the PPMT04. Nickel Plated Steel ...
£8.40
£7.00 ex. VAT
Heat Shrink Shield for Power Probe Micro Torch designed to focus heat around heat shrink tubing and protect surrounding areas....
£6.00
£5.00 ex. VAT
Hot Knife Tip designed for use with the Power Probe Soldering Tools. This tip is designed for plastic repair and electrical loom...
£7.20
£6.00 ex. VAT
Hard plastic case for Power Probe Micro Torch
£19.20
£16.00 ex. VAT
The High performance tungsten tip will penetrate through corrosion for more stabilized readings with less effort. Designed to be...
£28.80
£24.00 ex. VAT
Piercing probe (large) Self centering wire piercing. Designed for use on 18 - 8 gauge wire. 4mm Standard Banana Plug Fitting...
£18.00
£15.00 ex. VAT
Replacement 20" long auxillary ground lead with alligator / crocodile clip. Designed to replace earth lead on the PP3
£6.00
£5.00 ex. VAT
Strain relief that is fitted over PN3047 where it leaves the body / housing of the PP3
£2.40
£2.00 ex. VAT
Soldering Catalyst (heating element) specifically designed for the Power Probe Soldering Kit. Allows for flameless soldering. ...
£19.20
£16.00 ex. VAT
Heat Shrink Shield for Power Probe Soldering Kit designed to focus heat around heat shrink tubing and protect surrounding areas. ...
£7.20
£6.00 ex. VAT
Power Probe replacement brass nut PN007
£2.64
£2.20 ex. VAT
Circuit Safe Rosin Core for Soldering and electrical repairs. 60/40 tin to lead ratio Easily Dispensable Designed for...
£4.80
£4.00 ex. VAT
Replacement Soldering Tip for the Power Probe Soldering Kits Standard Solder Tip threaded for secure attachment Designed...
£7.20
£6.00 ex. VAT
Soldering Tip Adapter for the PPMT that contains the heating catalyst. Nickel Plated Steel Porcelain mesh catalytic...
£16.80
£14.00 ex. VAT
Heat blower tip designed to work with the Power Probe Soldering Tools allows for flameless focused heat. Nickel Plated Brass...
£6.00
£5.00 ex. VAT
Wedge Tip is designed for use with the Power probe Soldering Tools. Nickel plated brass Wedge Tip threaded for secure...
£7.20
£6.00 ex. VAT
Power Probe PN3005Z replacement Zebra ribbon for circuit board . These strips are used - they have been recoved from PowerProbe...
£21.60
£18.00 ex. VAT
Replacement Power probe 3 circuit board
£36.00
£30.00 ex. VAT
PowerProbe storage case as supplied with the Power Probe 3. Part number PN021 Can be used with other moldels such as the...
£18.00
£15.00 ex. VAT
The Power Probe 4 switch latch PPSL4 is designed to clip over the body of your PowerProbe 4 and allow the switch to be held in...
£14.40
£12.00 ex. VAT
4mm Standard Banana Jack 3-inch probe tip 3" Probe tip 4mm male banana plug Adapts Standard 4mm Banana Jack Test...
£12.00
£10.00 ex. VAT
4mm Standard Banana Jack 3-inch probe tip 3" Probe tip 4mm male banana plug Adapts Standard 4mm Banana Jack Test...
£12.00
£10.00 ex. VAT
Power Port Adapter (Cigarette lighter) with heavy-duty keyed connector for powering PPI,PPII, PPIII & ECT2000. Keyed...
£16.80
£14.00 ex. VAT
Hook-up connection crocodile / alligator clips for the vehicle's battery designed for the PPI,PPII, PPIII & ECT2000. ...
£12.00
£10.00 ex. VAT
PowerProbe storage case as supplied with the PPIV
£21.60
£18.00 ex. VAT
This spring loaded hook clip is designed to hold onto small back probe pins, wires or terminals. Has 4 MM banana plug for easy...
£9.60
£8.00 ex. VAT
Gold plated banana jack that screws into top / end of PowerProbe 3 & 4 to accept the tip.
£6.00
£5.00 ex. VAT
Pack of five 20A fast blow fuses to fit Power Probe 4 (PP4) PP401AS Power Probe Hook PPH1 Power Probe Maestro...
£14.40
£12.00 ex. VAT
PowerProbe PN3060 black end cap. This part is between the PP3 body and the tip.
£8.40
£7.00 ex. VAT
20-foot extension cable with male and female heavy-duty keyed connectors. Compatible with PPI, PPII, PPIII & ECT2000. 20...
£24.00
£20.00 ex. VAT
Fuse cover for Power Probe 4 & Hook
£7.20
£6.00 ex. VAT
Circuit breaker for Power Probe 4
£18.00
£15.00 ex. VAT
Replacement 20ft. Cable for the PPI, PPII, PPIII & ECT2000 - this cable is hardwired into the PP3 Keyed Connections ...
£16.80
£14.00 ex. VAT
No description could be found for this product.
£12.00
£10.00 ex. VAT
No description could be found for this product.
£18.00
£15.00 ex. VAT
2 Inch T-Type Stick Pin 5 pack PPAKIT025
£12.00
£10.00 ex. VAT
No description could be found for this product.
£18.00
£15.00 ex. VAT
Power Probe AA12 five inch extension. Only supplied with Power Probe Penetrator High Performance Tip PHPT1 -...
£9.60
£8.00 ex. VAT
Power Probe AA14 accessory adapter flat blade plug
£9.60
£8.00 ex. VAT
Power Probe Alligator clip 4mm adaptor
£6.00
£5.00 ex. VAT
Power Probe Hook accessory pack.
£36.00
£30.00 ex. VAT
Soft carry case to fit PowerProbe Hook. Tool shown for illustration purposes and NOT included
£30.00
£25.00 ex. VAT
Magnetic fuse probes PPEFASET Fuse tester probes that are held together by magnets allowing three different...
£10.80
£9.00 ex. VAT
Nice handly little kit using 4mm banana type connectors so will work with PowerProbe and othe brands of testers and multimeters ...
£30.00
£25.00 ex. VAT
