Flat blade adapter allows connectivity to female blade fuse sockets and flat terminals. As supplied in the Master Technicians kit...
£9.60
£8.00 ex. VAT
Back probe adapter allows connectivity to all electronic terminals on back side of connector without damaging seals. Mini...
£8.40
£7.00 ex. VAT
Insulated Alligator clip with a standard 4mm male banana plug. Connects to Standard test leads with 4mm banana jack. ...
£7.20
£6.00 ex. VAT
Power Probe banana Jack threaded PNLS020.
£6.00
£5.00 ex. VAT
Single terminal bulb adapter for connecting to the vehicles circuits through the light bulb sockets. 1156 bayonet type light...
£9.60
£8.00 ex. VAT
Chisel Tip is designed for use with the Power Probe Soldering Tools. Nickel plated brass Chisel Tip threaded for secure...
£7.20
£6.00 ex. VAT
Piezo Electronic Igniter for Micro Torch
£9.60
£8.00 ex. VAT
Replacement electronic igniter for PPSK
£7.20
£6.00 ex. VAT
Heat blower attachment designed to work with the Power Probe Micro Torch. Can be used with the PPMT04. Nickel Plated Steel ...
£8.40
£7.00 ex. VAT
Heat Shrink Shield for Power Probe Micro Torch designed to focus heat around heat shrink tubing and protect surrounding areas....
£6.00
£5.00 ex. VAT
Hot Knife Tip designed for use with the Power Probe Soldering Tools. This tip is designed for plastic repair and electrical loom...
£7.20
£6.00 ex. VAT
Replacement 20" long auxillary ground lead with alligator / crocodile clip. Designed to replace earth lead on the PP3
£6.00
£5.00 ex. VAT
Strain relief that is fitted over PN3047 where it leaves the body / housing of the PP3
£2.40
£2.00 ex. VAT
Heat Shrink Shield for Power Probe Soldering Kit designed to focus heat around heat shrink tubing and protect surrounding areas. ...
£7.20
£6.00 ex. VAT
Power Probe replacement brass nut PN007
£2.64
£2.20 ex. VAT
Circuit Safe Rosin Core for Soldering and electrical repairs. 60/40 tin to lead ratio Easily Dispensable Designed for...
£4.80
£4.00 ex. VAT
Replacement Soldering Tip for the Power Probe Soldering Kits Standard Solder Tip threaded for secure attachment Designed...
£7.20
£6.00 ex. VAT
Heat blower tip designed to work with the Power Probe Soldering Tools allows for flameless focused heat. Nickel Plated Brass...
£6.00
£5.00 ex. VAT
Wedge Tip is designed for use with the Power probe Soldering Tools. Nickel plated brass Wedge Tip threaded for secure...
£7.20
£6.00 ex. VAT
The Power Probe 3 switch latch PPSL3 is designed to clip over the body of your PowerProbe 3 and allow the switch to be held in...
£4.08
£3.40 ex. VAT
This spring loaded hook clip is designed to hold onto small back probe pins, wires or terminals. Has 4 MM banana plug for easy...
£9.60
£8.00 ex. VAT
Gold plated banana jack that screws into top / end of PowerProbe 3 & 4 to accept the tip.
£6.00
£5.00 ex. VAT
PowerProbe PN3060 black end cap. This part is between the PP3 body and the tip.
£8.40
£7.00 ex. VAT
Fuse cover for Power Probe 4 & Hook
£7.20
£6.00 ex. VAT
Acicular Test Probe Set - Black & Red
£7.20
£6.00 ex. VAT
Power Probe AA12 five inch extension. Only supplied with Power Probe Penetrator High Performance Tip PHPT1 -...
£9.60
£8.00 ex. VAT
Power Probe AA14 accessory adapter flat blade plug
£9.60
£8.00 ex. VAT
Power Probe Alligator clip 4mm adaptor
£6.00
£5.00 ex. VAT